Product

A company that pursues innovation.

Dental Implants

Special Prosthetic Solution

Overdenture or zirconia prosthetic systems with a machined bar and dedicated attachments. This prosthesis can be used to treat cases with severe bone resorption or abnormally positioned implants

E-Catalog View

Digital Milled Bar | Zirconia All-On-X

Free-detached All-on-X with a zirconia fixed prosthesis without allowing movement.

Digital Milled Bar | Zirconia Partial Prosthesis

Free-detached aesthetic zirconia prosthetics used for partially edentulous areas with severe bone resorption, with an adequate number and distribution of implant fixtures

Digital Milled Bar | Overdenture

Overdenture using a resin material with a fixed prosthesis function that doesn’t allow movement

Digital Milled Bar | Partial Denture

If bone resorption is so severe in the partially edentulous jaw and implant locations are abnormal, the implants can support the partial denture with less movement

It is possible to repair the fixed prosthesis in the event of a failed implant(s). If the number and position of the remaining implants are optimal to make a rigid type of prosthesis (without movement), these overdenture and zirconia detachable prostheses with a milled bar and dedicated attachment system can create a great prognosis.
Aesthetic high-strength zirconia prostheses can be produced by CAD/CAM (design & manufacturing)
Since there are no screws or cement, no screw holes will be found on the occlusal surface of this prosthesis. It’s detachable whenever the patient or the Dentist wants to remove the prosthesis during check-up or for cleaning.

Kerato, Locator Abutment(Compatable with Kerato & Locator)

Abutment
Type	①Connection	②G/H (mm)	Remark
	Standard (LCAS40XX)	2/3/4/5/6/7/8	Compatible with all internal submerged implant fixture with 11° morse taper
	Mini (LCAM35XX)	2/3/4/5/6/7/8	Only applicable to Add-on Mini(Ø3.5) implant or Hiossen(Osstem) TSIII Mini(Ø3.5) implant
Attachment
KERATOR MALE CAP SET